This gateway provides two-way communication between KNX and RS485. Two-way messages can be edited through the host computer software. The 485-to-KNX messages and KNX-to-485 messages support 512 conver
This gateway provides two-way communication between KNX and RS485. Two-way messages can be edited through the host computer software. The 485-to-KNX messages and KNX-to-485 messages support 512 conversions, and the 1byte type KNX plus and minus messages support 256 groups.
Bus voltage | 21...30 V DC, bus supplied |
Bus current consumption | < 12 mA |
Bus power consumption | Max. 360 mW |
Auxiliary voltage | 12-30V DC |
Auxiliary power consumption | < 5W |
Programming button | Assign physical address |
Programming indicator | The red light allocates physical addresses, the green light flashes, and it runs normally |
Reset button | Reset screen display |
IP protection | IP20 EN60592 |
installation | Flush-mounted |
Length, width and height | 42x42x20mm |
weight | 1.5kg |
Work temperature | – 5 °C ... + 45 °C |
Storage temperature | – 25 °C ... + 55 °C |
Transport temperature | – 25 °C ... + 70 °C |
humidity | <93%, except for condensation |
Paper package
